Dell Targus APB081 140W Power Bank USB-C 86.4Wh HKMG9 451-BDJG

Dell Targus APB081 140W Power BankPlease note:To use 140W you need to make sure that your device supports Extended Power Range (EPR) for USB-C.To support 100W charging, your device’s USB-C port needs to support USB PD 3.0Product:Genuine Original Dell product.Complete with1 x Targus 86.4Wh Laptop Power Bank1 x EPR (Extended Power Range) charging cableUser guideUser guideModelAPB081MakeTargus 140W 86.4Wh USB-C Portable Power BankDell P/NHKMG9, W96HN, 451-BDJGPorts & Slots1 x Output USB-A 5V/2A 10W , 1 x Output USB-C Up to 140W PD 3.1 and Input USB-C (5V, 9V, 15V, 20V, 28V), 1 x USB-C Up to 140W PD 3.1SpecificationsProduct SpecificationsInput Specifications Port 1: USB-C DRP connector Protocols: PD3.0/PPS/BC1.2/Apple 2.4/Samsung AFC/QC/Huawei SCP/FCP Max Power Input: 60W Voltage/Current Ratings: Standard Power Range 5V @ 3A (15W) 9V @ 3A (27W) 12V @ 3A (36W) 15V @ 3A (45W) 20V @ 3A (60W)Output Specifications Output 1 (USB-C1, DRP connector) Protocols: PD3.1/PPS/BC1.2/Apple 2.4/Samsung AFC/QC/Huawei SCP/FCP Max Power Output: 140W Voltage/Current Ratings: Standard Power Range 5V @ 3A (15W) 9V @ 3A (27W) 12V @ 3A (36W) 15V @ 3A (45W) 20V @ 3A (60W) – Requires a 5A cable Voltage/Current Ratings: Extended Power Range 28V @ 5A (140W) – Requires an EPR cable PPS: 5V–21V @ 5A Requires a 5A cable to exceed 3A.Output 2 (USB-C2, DRP USB-IF certified connector) Protocols: PD3.1/PPS/BC1.2/Apple 2.4/Samsung AFC/QC/Huawei SCP/FCP Max Power Output: 140W Voltage/Current Ratings: Standard Power Range 5V @ 3A (15W) 9V @ 3A (27W) 12V @ 3A (36W) 15V @ 3A (45W) 20V @ 3A (60W) – Requires a 5A cable Voltage/Current Ratings: Extended Power Range 28V @ 5A (140W) – Requires an EPR cable PPS: 5V–21V @ 5A Requires a 5A cable to exceed 3A.Output 3 (USB-A connector) Protocols: BC1.2, Apple 2.4 Voltage/Current Ratings: Standard Power Range 5V @ 2A (10W)Power Profile Single Output: USB-C1: 140W Max USB-C2: 140W Max USB-A: 10W Max Dual Outputs: USB-C1 USB-A: 100W 10W (110W Max) USB-C2 USB-A: 100W 10W (110W Max) USB-C1 USB-C2: 65W 65W (130W Max) All Outputs: USB-C1 USB-C2 USB-A: 100W 30W 10W (140W Max) USB-C1 USB-C2 USB-A: 65W 45W 10W (120W Max) All outputs are isolated and do not share an output rail. When charging multiple devices from the Power Bank, each port must be able to do independent protocol negotiation. Every time a new device is inserted into an output port, all ports must reset and renegotiate power capabilities.Key FeaturesLightning-Fast Charging on the Go Keep your Dell laptops and tablets charged anywhere.Lightning Fast, Reliable Charging The Targus 140W USB-C Portable Power Bank is equipped to deliver 140W PD 3.1 charging capacity, so your devices are fully charged in no time.Lightweight and Portable, Safe for Airline Travel Designed to be airline-safe and super portable, this power bank is an ideal charging solution when traveling.Safety First This ultra-fast USB power bank offers protection from overcharging, over voltage, over-current, and over-heating. Leverage USB-A charging and USB-C charging without worry. All Targus products pass third-party compliance testing and have a fire-retardant rating which meets UL requirements.Charging the Power Bank Using the USB-C cable, connect the USB-C connector to the Power Bank, and the other connector to a USB charger. The 4 LED lights will begin to flash when the Power Bank is charging. When all 4 LEDs are lit, the unit is fully charged. Charging will take 3-4 hours depending on the source.Using the Power Bank To power and charge your device from the Power Bank, use the sync and charge cable that came with your device or the included USB-C cable. Connect the standard USB connector to the Power Bank and connect the other end of the cable to your device. Push the power button. The LEDs will turn on briefly, and your device will begin to charge. To check the battery level, press the power button; the LEDs will indicate the remaining power level. To turn off the power and LED, press and hold the power button. To enable low-power mode, double-click the power button. To return to normal mode, double-click the power button. It is recommended to use low-power mode to charge low-power accessory devices such as Bluetooth headsets and smartwatches.